From ZOOM, the masters of effects come the new studio, club and
road-ready RFX Series Processors. Each comes packed with customizable
high-resolution audio processing tools that will take your sound to new levels
without compromising any of your signal's original purity.
The RFX-1100 offers a huge array of reverb settings: 121 acoustic character settings
including 11 distinct types, each with 11 settings.
Reverb Type:
- Hall Recreates the acoustics of a large hall or similar venue
- Room Simulates a cubic space, from a small room to a large club
- Plate Duplicates an analog plate reverb machine
- Vocal Reverb optimized for vocals or narration
- Ambience Adds natural ambience and depth to the sound
- Dimension Allows flexible control of sound source spread
- Percussion Reverb optimized for drums and percussion
- Ensemble Sound designed for ensembles such as strings or brass sections
- Power Adds a feeling of power to various sources
- Gate Special effect where reverb is cut shapy by a gate
- Reverse Like a tape run in reverse
Intuitive controls with analog feel
Selecting an effect type, changing a parameter or adjusting the
balance between dry and wet-every operation is controlled quickly and
intuitively with front panel knobs. Making a change on the fly in a live or DJ
setting is effortless.
XLR input allows direct microphone
connection
The combined XLR / phone connector on the front panel lets you use
the unit as a stand-alone effect processor for vocals. A Mic Simulator with
condenser mic characteristics is convenienct for recording vocals or acoustic
instruments. Connect a synthesizer to the rear-panel INPUT jacks and use the mic
to control the VOCODER effect.
Mixdown effects take your creations to the next
level
When transferring a song created on a multi-track machine to a
master recorder, the mixdown effects of this unit make it easy to provide sound
quality compensation and adjust the overall tone. It's also perfect for
transferring old sources, such as cassette tapes or records to digital
media.
Multi-use effect programs for various
environments
There's a lot more here than just reverb: Six-voice stereo chorus
for instruments, 8-stage stereo Phaser, Flanger with adjustable bandwidth.
There's a broad palette of high-grade effects at your fingertips. For recording,
there is a Compressor / Limiter that gives you control over input signal levels
as well as a cabinet simulator for that special guitar amp sound.
Specifications:
|
Preset programs: 363 (11 effects x 3 banks x 11 variations)
Sampling frequency: 44.1 kHz
A/D converter: 18 bit, 64 times oversampling
D/A converter: 18 bit, 8 times oversampling
Line input: 2 x 1/4" phone jack, Input impedance 10kΩ (mono),
20kΩ (stereo), Reference input level: -10dBm to 4 dBm
Microphone input: XLR-3-31 / 1/4" phone combo jack (Balanced
operation) Input impedance: 4.5kΩ, pin 2 hot (Unbalanced operation) Input
impedance: 50kΩ, Reference input level: -56dBm
Outputs: 2 x 1/4" phone jack, Output impedance: 500Ω,
Reference output level: -10dBm to 4dBm
Control input: FS01
Power supply: 100 - 120V or 220-240V, 50/60 Hz
Dimensions: 482 (W) x 115 (D) x 44 (H) mm
Weight: 1.8 kg
Supplied accessory: Power cord
|